5.4 Loading the Paper :
To load the first roll plug the plastic holders into both ends of the roll and then lay
the roll into the dispenser so both pins locate into the paper roll cradles. The roll
should be ready to dispense towards you from the top of the roll.
With the blue lever on the left side, raise the front paper guide with paper feed
through.
Press the button labelled “Manual operation” and the paper is automatically pulled
in and dispensed from the device.
(The button is located under the removable splash cover; use the device key to
press if required).
Then tear off the first piece of paper, attach the splash guard and close the door of
the dispenser. The dispenser is now ready for operation.
It is possible to install a new roll even though the old roll is not yet completely
finished.
For this purpose, remove the old roll from the upper cradle and insert into the lower
cradle. Push down all the way. The paper guide is then raised forward
automatically.
The new roll is then fitted as described above into the upper cradle. The paper is
fed under the paper guide (see above) secured there with the paper guide.
The dispenser is now ready for operation, the door can be closed. If the old roll is
finished it can be thrown away.
User manual roll towel dispenser series DP 3107 / DP 3108 / DP 3109 / DP 3110 23
