Operation
- 17 -
SCAN will automatically stop when a signal is detected on one channel, in order to listen
to the communication and SCAN will re-start when no more signal is detected on that
channel after about 4 seconds. If you press the PTT key (15) during the SCAN operation,
SCAN will stop automatically and radio will set the last programmed channel. SCAN will
then restart after about 14 seconds if no signals are received on that channel.
4.
Press the SCAN (14) key to exit the SCAN mode.
5.
To exit the MEMORY MODE switch OFF and ON the radio.
SCRAMBLER FUNCTION (DOLPHIN-EX)
You can enjoy privacy of communication within your group, by enabling the SCRAMBLER
function and selecting the same scrambler formula as your group members do. Two different
scrambler formulas are available and selectable (01-02). To enable the SCRAMBLER function
please proceed as follows :
1. Press and hold the LIGHT (12) key for about 3 seconds until the
Sc
(P) indication appears
and the SCR (H) icon will blink on the LCD display.
2. Press the UP (5) or DOWN (7) keys to select the desired formula (01-02). Selecting
OF
will disable the SCRAMBLER function.
2. Press the PTT (15) key to confirm the selection and exit to Stand-by mode.
4.
When the SCRAMBLER function is enabled, the SCR icon (H) appears on the LCD display.
5.
Please make sure that other group members have enabled SCRAMBLER function and
select the same formula.
6.
To disable the SCRAMBLER function repeat the items 1-2 and select
OF
.
CTCSS FUNCTION (DOLPHIN-EX)
The radio has 38 CTCSS private codes available. Different CTCSS tones may be associated to
different channels. To choose the desired CTCSS code, please proceed as follows :
1. Press the MENU (8) key several times, until the CTCSS code number (N) blinks on the
LCD display. The CTCSS code
OF
(N) indicates that no CTCSS tone is programmed on
that channel.
2. Press the UP (5) or DOWN (7) keys to select the desired CTCSS code number. Pressing
and holding the UP (5) or DOWN (7) keys, the selection will move quicker.
3. To confirm the selection and exit the Menu Mode, press PTT key (15) or press the MENU
(8) key to move to the next function.
English
Summary of Contents for DOLPHIN MR-8060
Page 48: ...PRINTED IN CHINA...
