4
|
Dolphin Blue
|
DB 1675
INSTALLATION
1. Place the mixer body (2) into the wall cavity and screw to supporting member
or wall using the fixing kit (1) provided.
2. Connect the water supplies to the 15mm compression fittings on the mixer
body following the hot and cold markings. The cold connection is on the right
and the hot on the underside when viewed from the front.
3. Before finishing wall, temporarily fit spout (5) and mixer control (8) and fully
open the mixer letting it run for a few minutes, check all joints and connections
for leaks
4. Remove spout and mixer control then fit the final wall finish.
5. Fit mixer control (8) ensuring temperature markings face upward and secure
with grub screw (10)
6 Fit mixer control rosette (6) then fix mixer control lever (7)
7. Fit spout (5) and secure with grub screws (4).
