32 DOLPHIN
ALAVO
O & M MANUAL
www.dolphinsolutions.co.uk
1. Locate the control box and
isolate the power
2. Open the control box with
the key
3. Locate the PCB on the
reverse of the door
4. Locate and check/reset the
fuses
C H E C K I N G / R E S E T T I N G T H E F U S E S ( C U R R E N T M O D E L )
A L AVO F U S E C H E C K I N G / R E S E T T I N G
1. Isolate the power at the
RCD as step 1 above.
Then open the control
box to expose the main
controller PCB at the
back of the control box.
2. Locate the fuses at the
bottom of the main
controller PCB.
3. Remove the fuses one
by one by pulling at the
back cover – no tools
required
4. Check each fuse – if a
fuse has blown the wire
will have broken within
the glass.
C H E C K I N G / R E P L AC I N G T H E F U S E S ( P R E V I O U S V E R S I O N )
To replace fuses simply follow steps above in reverse order.
If fuses continue to break then call our service team to help with identifying the cause.
If any of the low voltage elements (everything except the hand dryers) are
not working it may be necessary to check and reset/replace the fuses.
