22 DOLPHIN
ALAVO
O & M MANUAL
www.dolphinsolutions.co.uk
1. First undo the grub screw
which hold the sensor in
place
2. Then remove the clear tube
from the compressor
3. Then with a spanner undo
the nut
4. Then remove the mesh
filter from the bottom of
the compressor
5. Push the white filter out
of the black surround
6. Clean with warm water,
and then reassemble
Dolphin foam soap dispensers include mesh filter inside the compressor which should be regularly
cleaned with warm water. It is recommended to clean the mesh tubing every six (6) months, at a
minimum, and after periods of non-use, to avoid decrease in soap volume due to clogging by soap and
debris. The mesh tubing should be rinsed with warm water and reassembled on the compressor. The
following steps show you how it is done
C L E A N I N G T H E C O M P R E S S O R
( F OA M D I S P E N S E R S )
