![Dolmar PC-7312 HappyStart Service Manual Download Page 5](http://html1.mh-extra.com/html/dolmar/pc-7312-happystart/pc-7312-happystart_service-manual_2517201005.webp)
5
DOLMAR GmbH
1
2
3
4
5
6
8
02 Clutch, clutch drum
9
11
12
13
7
02-01 Dismantling the clutch/drum
To remove the clutch and drum, the piston
must be blocked. To do this, unscrew the 3
screws (9) fixing the muffler and insert the
piston stop wedge (944.602.000) in to the
exhaust port of the cylinder (11).
02-01 Dismantling the clutch/drum
The side strut is fixed with 3 screws (6) to
the tank and the collector (7) for the right
upper damper device.
02-01 Dismantling the clutch/drum
The cover for the V-belt is fixed to the crank-
case with 3 screws (8).
02-01 Mounting muffler and heat plate
When mounting the muffler ensure that the
heat plate is installed correctly (see drawing).
Note: The heat plate (12) comes directly on to
the cylinder, then the gasket (13) and muffler.
02-01 Dismantling the clutch/drum
To remove the cutting device, loosen the
fixing screws (4). Remove screw (5) to the
point where the end of the screw projects
from the cover (arrow).
02-01 Dismantling the clutch/drum
To dismantle the clutch and drum, remove the
cutting device (1), strut (2) and V-belt cover
(3).
Summary of Contents for PC-7312 HappyStart
Page 23: ...23 DOLMAR GmbH Notice...