16
DOLMAR GmbH
B
C
2-3 mm
(.080”-0.12”)
;;
;;
2
2
3
1
5
4
6
8
7
09-02 Removing the ventilation valve
Push the ventilation valve with a pin into the
tank (arrow) and remove with pointed pliers
through the filler opening.
09 Fuel tank
09-02 Inserting the ventilation valve
Press the new ventilation valve with a pin
into the housing until the white sinter plastic
project about 2-3 mm beyond the tank.
09-03 Replacing the throttle lever mecha-
nism
Push the two cylindrical pins (1) out of the
handle dish (2). The throttle lever (3), spring
(4) and throttle lock (5). The throttle lock (6)
for half throttle can also now be replaced.
09-04 Replacing the fuel pipe
Unscrew tank cap, remove suction head (7)
from tank and pull off the suction pipe (8). Pull
suction pipe upwards out of the tank.
09-05 Testing the fuel filter
Dirty felt filters or filters which have become
hardened/blocked with fuel will lead to leaning
of the fuel/air mix and will damage the engine.
Note: They fuel filter must therefore be
cheked/ replaced regularly.
09-05 Testing the fuel filter
A fingernail test can be used to check
whether the filter is blocked.
Easy to push in = filter OK
Cannot be pushed in = filter blocked, replace
as a matter of urgency.
Summary of Contents for PC-7312 HappyStart
Page 23: ...23 DOLMAR GmbH Notice...
