Clamping devices and trestles
Standard clamping device (orange)
In order to reconvert the clamping device,
the mitre tool must be widely opened and
the safety bolt (round black button) must
be pulled horizontally. Then the clamping
device can be removed and inserted into
the second insertion slot. Then the safety
bolt must be released again, allowing it to
lock into place.
Please check the position of the toggle
lever before every punching process!
Cubu fl ex life, EP 60/80,
S 66/22, Cubu Touch & Style,
Cubu Stone & Style
S 60/100, C 60/100,
D 60, TS 60/100
Spannhebel XL
für Cubu XL,
Cubu Touch
&
Style XL,
Hamburger Stil
clamping device XL
for Cubu XL,
Cubu Touch & Style XL,
Hamburg Style
1.
öffnen
open
2.
ziehen
pull
3.
heben
lift
4.
senken
insert
5.
schließen
close
Clamping device XL (black)
The clamping device XL is used for
punching the XL core boards (extra thick
core) and is replaced with the standard
clamping device (see overview on the
previous page).
The clamping device XL must always be
used in the rear insertion slot.
Insert the clamping device XL
into the rear insertion slot of the
double insertion plate, apply
the skirting board as usual and
carry out the punching process.
Scan with your
smartphone
now and watch
all punching
videos!