background image

a.

Reading this manual carefully allows you to benefit 
most from the Rest System, as well as prolong the 
lifespan of your product.

Before you start using your DOLFINOS, 

 activate the built in lubrification 

in the hinge 

pin system by 

(a)

 first

 turning both pin caps 

a  

few times and then start slowly and simultane-
ously turning and pulling out the pins. Repeat 
this after longer periods of non-use. Clean and 
lubricate the pin lock system regularly.

Loosen the screws of the adapter with the 
key 

(b)

 and pry the adapter open 

(c)

. Please 

only use the supplied key.

PLEASE NOTE

The access of the screws is designed in a user- 
friendly manner: The heads of the screws are 
aligned with the O's of the DOLFINOS brand 
marking. Be aware that the blade of the screw-
ing tool is only kept in place in the handle by a 
magnet.

Therefore:
1.   All tools and parts must be kept away from 

children and vulnerable people at all times.

2.   If this piece falls out, it may damage the 

surface of your instrument.

3.   Most airports accept this tool in hand-  

luggage. DOLFINOS Ltd. cannot guaran-
tee the accuracy of this information.

DOLFINOS declines any responsibility in 
con nection with the use of a screwdriver that 
has not been provided by the company. This 
statement is valid for the entire user manual.

READY TO PLAY 

In just a few steps.

b.

1.

c.

Summary of Contents for The CARBON Edition













Reviews: