background image

IMPORTANT DISCLAIMER:
DOLFINOS is not liable for any damages to or from your 
DOLFINOS violin rest system or your instruments if you have 
not followed our disclaimer below and all instructions of this 
manual.

Please consider the following guidelines when using the 
product:
-   As this product has high-tech features you must carefully 

read this booklet before using your DOLFINOS System.

-   Use carefully, keep away from small children.
-   Keep in a dry environment and out of direct sunlight.
-   Always use tools provided by DOLFINOS, replace them 

when worn out. 

-   Make sure the miniature neodym magnets of the pin lock    

system (3x4 mm) do not interfere with a pacemaker. In 
doubt, ask your MD for advice.

-   For further questions, please feel free to contact DOLFINOS.

Keep the cushions and the Grip Hoods away from children as 
they pose a choking hazard! To profit most from our system  
we recommend viewing all tutorials and testimonials on  
our website.

Our warranty only covers damage to our products caused by 
proper use. Excluded from the warranty are the consumable 
parts: Cushions, Grip Hoods, Insert screws, Insert thread.
We expressively refer to our GTC for further information.

Register number 
of your system

Summary of Contents for The CARBON Edition













Reviews: