Dolce Gusto LUMIO, User Manual

Page: 8 / 20

1
Rinse water tank manually with fresh drinking water. Fill
water tank withfresh drinking water. Insert water tank into
machine. Open locking handle.
2
Take capsule holder and press lockingtab to open it. Make
sure that rinsingtool is incapsule holder. Close capsule
holder.
3
Insertcapsule holder into machine. Close lockinghandle.
Place anempty large container underneath the coffee out-
let. Ensure to use the correct mains voltage as given in 2.
“MACHINEOVERVIEW” on page 5. Connectpower plugto
mains power socket.
4
Switchon machine by scrolling the volume selector. Indic-
ator light starts blinking red while machine is heatingup for
approximately 40 seconds. Afterwards indicator lights
steady green. Machine is ready to be used.
5
Set volume display to 7 withvolume selector. Push selec-
tionlever to the "COLD" position. Machine starts rinsing.
STOP
6
Waituntil water flow stops. Indicator light blinks red for a
few seconds, and changes to steady green. Lever moves
back to the "Stop" position.
7
Pushselection lever to the "HOT" position. Machine starts
rinsing.
STOP
8
Waituntil the lever moves to the "STOP" position. Open
lockinghandle. Pull out capsule holder. Open capsule
holder. Remove rinsingtool. Keep it in a safe place for later
cleaningor descaling. Reinsert capsule holder.
9
Empty container. Fill water tank withfresh drinking water.
Insertwater tank into machine. Machine is ready to be
used.
8
5. FIRST USE