Dolce Gusto LUMIO, User Manual

Page: 10 / 20

6. PREPARING A BEVERAGE
6. 2 TWO CAPSULES (E. G. CAPPUCCINO)
1
Adjustdrip tray position. Place cup with correctcup size on
driptray. See 3. "BEVERAGE EXAMPLES" or package. Check
ifthe water tank contains enough fresh drinkingwater.
2
Openlocking handle. Pull out capsule holder. Machine
switches on automatically. Indicator light starts blinking
red while machine is heatingup for approximately 40
seconds. Afterwards indicator lights steady green. Machine
is ready to be used.
3
Use volume selector to set volume display inaccordance
withthe number of bars shown on capsule, or select
amountof bars to your own taste. Choose XL beverage for
anextra big cup. Wait around 1.5 min if you want to prepare
a secondextra big cup.
4
Opencapsule holder. Make sure rinsingtool is not inside.
Insertfirst capsule in capsule holder. Close capsule holder.
Insertit back into machine. Close lockinghandle.
5
Pushselection lever to the "HOT" or "COLD" position as
recommendedon capsule packs. Beverage preparation
starts. Wait until extraction stops. Extraction can be
stoppedat any time manually by moving the lever back to
the "STOP" position.
STOP
6
After finishingpreparation the indicator light blinks red for a
few seconds, and changes to steady green. Lever moves
back to the "Stop" position. During that time donot open
lockinghandle!
7
Openlocking handle. Pull out capsule holder. Open capsule
holder. Remove used capsule. Put usedcapsule industbin.
Pay attentionnot to throw away capsule holder.
8
Use volume selector to set volume display inaccordance
withthe number of bars shown on capsule, or select
amountof bars to your own taste.
9
Insertsecond capsule incapsule holder. Close capsule
holder. Insert itback into machine. Close locking handle.
10