1
Rinse water tank manually with fresh drinking water. Fill
water tank with fresh drinking water. Insert water tank into
machine.
2
Open locking handle. Make sure that rinsing tool is in
capsule holder and capsule holder is in machine. Close
locking handle. Place a large empty container underneath
the coffee outlet.
STOP
3
Make sure that the selection lever is in “STOP” position.
Ensure to use the correct mains voltage as given in 2.
"
MACHINE OVERVIEW" on page 5. Connect power plug to
mains power socket.
4
Switch on machine. Power button starts blinking red while
machine is heating up for approximately 40 seconds.
Afterwards power button lights steady green. Machine is
ready to be used.
5
Push selection lever to the "COLD" position. Machine starts
rinsing.
STOP
6
After approximately 60 seconds push selection lever to the
“STOP” position. Machine stops rinsing. Power button
blinks red for about 5 seconds.
7
Push selection lever to the "HOT" position. Machine starts
rinsing.
STOP
8
After approximately 60 seconds push selection lever to the
“STOP” position. Open locking handle. Pull out capsule
holder. Remove rinsing tool. Reinsert capsule holder.
9
Empty container. Fill water tank with fresh drinking water.
Insert water tank into machine.
9
5.
FIRST USE
