1-2
1.3
Regulatory Notices
FCC
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with this instruction
manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his or her own expense.
UL
Troubleshooting must be performed by trained technicians. Do not attempt to service the
unit unless you are qualified to do so.
WARNING:
Check that the units have been set to the correct supply voltage and that the
correct fuses have been installed. To reduce the risk of fire, replace the fuses only with
the same type and rating. Do not use a ground-lifting adaptor and never cut the ground
pin on the three-prong power plug.
UK
Connections for United Kingdom.
WARNING: THIS APPARATUS MUST BE EARTHED.
As the colours of the cores in the mains lead may not correspond with the coloured
markings identifying the terminals in your plug, proceed as follows:
•
The core which is coloured green and yellow must be connected to the terminal in the plug which is
marked with the letter
E
or by the earth symbol
, or coloured green or green and yellow.
•
The core which is coloured blue must be connected to the terminal which is marked with the letter
N
or coloured black.
•
The core which is coloured brown must be connected to the terminal which is marked with the
letter
L
or coloured red.
Europe
This unit complies with the requirements of EN 60065, EN 55103-1 and EN 55103-2 when
installed in an E2 environment in accordance with this manual.
