Cat. No. 441 Alignment Instructions from the CP65 Manual
Notes
2-21
Cat. No. 441—Subwoofer Alignment
The Subwoofer auto/off switch on the Cat. No. 441 card enables the subwoofer in
formats other than Non-sync (format 60) , Mono (format 01) and magentic no NR (format
22). The switch must be in the auto (up) position at any time the subwoofer system is to
function.
Confirm that the microphone is in the position shown.
All connections established in the room equalization procedure apply to the following
steps.
The main front panel FADER should be active and set to 7. If necessary, press the select
local/remote switch.
Place the Le toggle switch on the Cat. No. 85C card in the ON (up or down) position and
set the CP65 to format 10 Dolby Digital.
