background image

13

Operations

SETTING UP THE UNIT

1. Install 2 AAA batteries (for backup only).
2. Plug the AC adaptor cable into a standard 120V AC wall socket. Adaptor is required to   
    operate unit. Batteries are for backup only.
3. Time setting:
    a. Press and hold 

CLOCK

 button, until the Time/(Hour) display begins flashing;

    b. Press and release 

TUNE/TIME + 

or

 -

 to adjust Hours;

    c.Press and release 

CLOCK

 button switch to Minute adjusts mode(when it flashing);

    d. Do the same as hour adjusting(hold for faster setting).
    e. Press and release 

CLOCK

 to finish setting.

USING THE UNIT

„

 

Using the Alarms

This unit has a dual alarm system so you can set two separate alarms to different alarm 
times.

• 

Setting the Alarms 

Note: Alarm1 and Alarm2 are set the same way.
1. Press and hold the 

ALARM

(1 or 2) button until the alarm time flashes display;

2. Adjust the alarm time like clock setting;
3. Press and release 

TUNE/TIME + 

or

 - 

to adjust alarm volume.

4. Select FM(radio) or BZ (buzzer) by 

FM/BZ

 as an alarm tone;

5. Press and release the related alarm button to finish setting;
    (you can see alarm icon shows on the display).

• 

Reviewing, Arming and Disarming Alarm(Turn Alarm function On and Off)

1. Alarms are automatically armed when set. Active alarms are indicated by alarm types 
    on the display.
2. To review the alarm time, press and release the 

ALARM

 button once. The related wake 

    to source and alarm time will show on the display.
3. Press and release the 

ALARM ON/OFF

 button once to toggle it on or off. If the alarm is 

    armed, the alarm type will light up.

To Turn one of the alarms Off

1. Press and hold the related alarm button until it flashes on the display;
2. Skip the hour and minute adjust and go to the alarm tone type setting;
3. Press and release the 

FM/BZ

 to select alarm tone until no tone icon shows on the   

    display. 

• 

Stop the Alarms

When the alarm is sounding, press any key except the 

 

or

 -

 and 

SNOOZE/ 

DIMMER

 to stop the alarm and reset it to next day.

• 

Snooze Operation

Default snooze time is 9 minutes. Press and release the 

SNOOZE/DIMMER

 after an alarm 

sounds. The alarm will be silenced for the snooze time then sound again. Snooze can be 
pressed several times. 

„

 

Charging your smart devices or other personal devices:

USB ports are provided to charge up to 4 devices simultaneously. Connect the USB cable 
between your device and the unit. USB cable(s) are provided.

(The BUZZER alarm will last one hour if you do not stop it; The RADIO alarm will not stop)

Summary of Contents for CR32





















Reviews: