02
MOISTURE AND CONDENSATION
SAFETY
When connecting or disconnecting the AC
cord, grip the plug and not the cord itself.
Pulling the cord may damage it and create a
hazard. When you are not going to use the unit
for a long period of time, disconnect the AC cord.
WHEN IN USE
Do not use this unit in extremely hot, cold,
dusty, or humid conditions.
Do not restrict the air flow of the unit by
placing it on carpet or covering.
WARNING:
To reduce the risk of fire
or electric shock, do not expose this
apparatus to rain or moisture.
CAUTION:
Use of controls or
adjustments or performance of
procedures other than those
specified may result in hazardous
radiation exposure.
If unit is exposed to moisture and extreme
cold temperatures, then moved to a warm
environment, condensation may form on
internal components. Under these
circumstances, powering the unit on may
cause damage to the unit or cause harm to
the user. Allow the unit to stand in a warm
environment for 1 to 3 hours and allow the
unit to air dry safely.
Battery shall not be exposed to excessive
heat such as sunshine, fire or the like.
(
for
once batteries could be used to operate
apparatus and/or with battery operated
remote control)
Location of label on the apparatus if that
label was affixed under a lid or on the
bottom of the apparatus with a mass not
exceeding 7kg.
Warning:Changes or modificationgs to this
unit not expressly approved by the party
responsible for compliance could void the
user’s authority to operate the equipment.
NOTE:This equipment has been tested and
found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC
Rules.These limits are designed to provide
reasonable protection against harmful
interference in a residential installation.This
equipment generates, uses, and can radiate
radio frequency energy and, if not installed
and used in accordance with the instructions,
may cause harmful interference to radio
communications. However,there is no
guarantee that interference will not occur
in a particular installation.If this equipment
does cause harmful interference to radio or
television reception, which can be determined
by turning the equipment off and on, the user
is encouraged to try to correct the interference
by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment
and receiver.
•
Connect the equipment into an outlet on a circuit
different from that to which thereceiver is connected.
•
Consult the dealer or an experienced radio/TV
technician for help.
FCC Warnings
