10
OSD menu,Remote Control
Mirror/Normal Flip Image,Guideline
ON/OFF,Brightness,Contrast,Color,volume
Outline Dimension
4.6”(H)x7”(L)*8.2”(D)
Extension Cable
Length
50ft
Feature1
Pure copper wire
Feature2
Double shielding:tinfoil wrap up and copper wire winding
TROUBLESHOOTING
If you have any questions about this product, Please send us an mailbox
above!
Monitor will not power-up
(the power indicator LED lights is always
off)
Check fuse
Check 12v+ to monitor
Check ground connection
Check this product within the voltage range(12-32V) specified.
No signal/blue on monitor screen
Do a hard reset, unplug all cables, leave out for 1 minute and then
re-connect them.
Check to ensure that the connection to the camera is tight.
Verify camera cable is plugged into port labeled backup camera
Verify that the red positive trigger on power harness cable is put to
power 12v+.
No image on screen
Verify camera is on correct camera input
Verify cable is connected to monitor
Verify camera is connected to cable
Connect known working camera and cable to monitor.
No audio on camera
Verify volume setting
Verify chosen camera has audio function.
Verify chosen extension cable has audio wire
Wrong normal/mirror image setting
Verify RLUD(normal/mirror flip rotate image) setting,
e.g. mirror image:rear camera; normal image:front/side camera.
Verify chosen camera has mirror
No parking guideline on camera
Verify ruler setting is on
