Setting The Receiver:
Both R7 and R8 Receivers provide six training levels that allow you to customize the
training setting to your dog’s individual needs:
Audible Only, Level 1(low), Level 2 (medium), Level 3 (medium high), Level 4 (high),
and Level 5 (extra-high). When the receiver is first turned on (from the manufacturer)
it will automatically be set to Training Level 2 (Medium).
Changing the R7 and R8 Receiver Settings:
Your Dogwatch Dealer will start the training on the appropriate level according to your
dog’s personality and traits. If you need to change the training level on the receiver,
hold your test light magnet to the two raised lines on the side of the receiver
(
Figures
4 and 5
.
)
Hold the magnet steady and you will hear a series of beeps that indicate the
current (set) training level. The Training Level will continue to advance as long as the
magnet is held in position. For example, Level One is one beep, Level 2 is two beeps,
etc. The beeps (or Receiver Tones) represent the Training Level the receiver is set at.
See Chart on Page 8
.
When you reach the desired training level setting, pull the magnet away from the
receiver. The receiver is now set.
Note:
Any time the magnet activates the receiver, it
will first tell you what level the receiver is set to. As long as the magnet is held in place,
it will advance the receiver to the next training level and continue to cycle through the
settings in the order shown in the chart on Page 8.
A
UTO
M
EMORY
™ Correction:
Levels 2, 3 and 4 contain the AutoMemory™ feature. When the receiver is set to one of
the AutoMemory levels, and the dog enters the signal field, the dog will receive the cor-
rection of the initial setting. When the dog then leaves the signal field the receiver will
automatically advance the correction level setting by one, and only one level. If the dog
does not re-enter the signal field within the next 24 hour period, the receiver defaults to
the original setting.
.................................
.................................
7
Figure 4: R7 Receiver Settings
Figure 5: R8 Receiver Settings
