8
5.
Collar
1
/ Collar
2
Feature
Your transmitter comes set for use with one dog but can easily be programmed
for two dogs.
■
If you are working with
two dogs
, you will need
two receiver collars
. See
page 16 for information about adding the second collar.
■
The Collar 1 and Collar 2 buttons allow you to change commands between
the two collars. The transmitter saves the settings for each collar. The
settings change automatically when you switch from Collar 1 to Collar 2.
■
The LCD screen indicates if the transmitter is set to Collar 1 or Collar 2.
6.
Training Buttons
Vibration Button
((V))
Pressing the vibration button sends a
vibration signal
to the dog’s receiver
collar. The signal continues as long as you press the button.
Audible Button
Pressing the audible button sends an
audible signal
to the dog’s receiver
collar. The signal continues as long as you press the button. The audible
signal can be used as alternative or supplement to the vibration signal.
Firefly Nightlight Button
Pressing the nightlight button turns the nightlight on and off.
- Press briefly for intermittent use
- Press for 5 seconds to keep the flashing light on. Press again for 5 seconds
to turn it off.