44
ENGLISH
NOTE:
Locating acoustic signal can also be activated by pressing simultaneously
following buttons + .
8.2 Training
This feature enables correction of undesirable behaviour up to the distance of 20
km. The basic DOG GPS X30 kit enables using the acoustic command. DOG GPS X30T
(training) kit is enhanced by the use of the correction stimulation impulse. Another
feature of the training kit is the light indication of the dog in the dark with the aid of
powerful LEDs.
Acoustic signal (tone):
The basic DOG GPS X30/X30T kit has two types of acoustic signal.
The training acoustic signal (
) is used as the sound command, which
may precede the stimulation impulse and it is a very effective deterrent. Replaces
whistle, whose volume the dog perceives in the same manner, even though it is far
away.
Localization acoustic signal (
) acoustic signal is used to locate the dog
in dark or dense growth. This signal is audible up to the distance of 30 m.
This command is activated by the
push button. Switching between the training
(
) and localization (
) tones is carried out in the
MENU
.
1.
Long press the
MENU
push button.
2.
Select the
item by using / arrows; long press the
MENU
push
button to confirm.
3.
Select the transmitter (collar) position you wish to set –
to
; long press
the MENU push button.
4.
Select
by using / arrows, long press the
MENU
push button.
5.
Select the required type of acoustic signal (
/
).
6.
By repeatedly pressing return to the main screen.
– Receiver or transmitter does not have the GPS position.
– No paired transmitter at the given position.
– Receiver and transmitter are closer to each other than the accuracy of the
GPS position.
Stimulation impulse (IMPULSE): (ONLY GPS X30T)
This feature enables to activate warning in the transmitter (collar) in the form of safe
stimulation impulses transmitted by the two contact points. Stimulation impulses do
not hurt the dog. Impulse is very unpleasant to the dog, and consequently, will soon
make connection between the oral command, acoustic signal and uncomfortable
feeling on the neck.
Setting the impulse strength is carried out in
MENU
in the same manner as the
selection of weak/strong acoustic signal, with the difference that in
Point 4
, select
and in
Point 5
select the impulse strength where 0 is without impulse,
1 is the weakest impulse and 15 is the strongest impulse.
This command is sent to the transmitter (collar), which is selected on the receiver
