9
1
2
3
5.3 Power supply adapter and cable with a rechargeable clip
1.
Power supply adapter
2.
USB cable
3.
Charging clip
6 Transmitter preparation (collar)
6.1 Transmitter charging
Transmitter GPS contains Li-Pol accumulator. The
accumulator must be recharged before first use.
1.
Before charging clean the transmitter charging con-
tacts from any dirt. Connect the charging clip to the
transmitter (see the picture).
2.
Connect supply cable to power adapter and plug it
into the mains.
3.
The orange LED indicator on the transmitter will lit up.
4.
Charging time is approximately 3 hours.
5.
When the charging is completed, the orange LED
indicator goes OFF.
6.2 Checking the accumulator status in transmitter (collar)
The status of the accumulator is indicated by LED indicators on the top side of the
transmitter (see chapter:
Product destription – transmitter
) or symbol of battery on the
LCD of the receiver (handheld device).
WARNING:
Optimal temperature for charging is from 0°C up to 40 °C. Use only the
original power adapter supplied in the packing with the device. Other chargers
could damage the accumulator.
status charge
receiver
transmitter
100%
green LED indicator
70%
—
40%
green and red LED indicator together
10%
red LED indicator
Summary of Contents for DOG GPS X20
Page 1: ...EN User guide ...
