22
23
10. Battery Charger
The battery charger and charging cables allow you to
charge both the transmitter and receiver at the same
time. The battery charger is designed for a 120 volt wall
outlet (Also available: European 230 volt AC chargers
and 10 volt car chargers for lithium polymer batteries).
To use the battery charger for the two-dog unit,
combine both sets of charging splitter cables as shown.
This enables you to charge the transmitter and both
receivers at the same time.
Note:
Only use Dogtra-approved lithium polymer
battery chargers for your Dogtra e-collar. This will
prevent any damage that can be incurred from
attempting to use a different charger.
The 2700T&B Series uses lithium polymer batteries.
1. Charge the unit before using the unit for the first time.
2. Do not charge the batteries near any flammable
substances.
3. Fully charge the batteries if the unit is to be stored
without use for a period of 3 months or more.
Recharge the Unit If:
• The LED indicator light on the receiver/collar is
emitting a red color.
• If the 3 bar indicator on the transmitter LCD shows just
1 bar.
• The indicator light on the transmitter or receiver will
not come on.
• The indicator light on the transmitter or receiver comes
on momentarily, but will not stay on when the Constant
button is pushed.
Battery Charging Procedure
Note:
The unit has a partial charge when it leaves the
Dogtra facility. Upon receipt of the collar, be sure to give
it a full 2-hour initial charge before the first use.
11. Charging the Battery
