16
17
When you press the Mode button the first time, the collar
will beep twice. The beeper unit will always start in Run/
Point mode. The beeper will sound every 7 seconds while
the dog is running, and every 2 seconds when the dog
is on point or becomes stationary. The second time you
push the Mode button, it will beep once and remain silent
while the dog is running and beep every 2 seconds when
the dog is on point or stationary.
To turn the beeper unit off, press the Mode button a third
time. The unit will emit three rapid beeps, and the beeper
will turn off. The Locate mode can still be used!
When the 2700T&B toggle switch is set on low tone, the
beeper will emit a double beep when it is in Run/Point
mode or Point-Only mode. If the toggle switch is set on
the high tone, a single beep will sound when using Run/
Point or Point-Only mode.
Note:
The Locate button can be used in any mode you
are in.
3. Beeper Sound
4. Beeper Volume Adjustment
The beeper volume level for the Run/Point mode and
Point-Only mode can be increased or decreased by
holding the Locate button down and briefly pushing
the Pager button. The tone of the beeper can be
selected with a toggle switch located on the face of
the transmitter. There are two beeper tones: High (H1 =
lowest volume, H2 = medium volume, and H3 = highest
volume) and Low (L1 = lowest volume, L2 = medium
volume, and L3 = highest volume).
Note:
The Locate beeper volume is not
adjustable; it is always on the highest level, L3 on low
tone, or H3 on high tone.
Toggle Switch
High LCD Displays
Toggle Switch
Low LCD Displays
Press Pager 1st Time
(While holding down
the Locate button)
H1
L1
Press Pager 2nd Time
(While holding down
the Locate button)
H2
L2
Press Pager 3rd Time
(While holding down
the Locate button)
H3
L3
Initial Beeper
Sound
Mode
Action
Press
1st Time
2 Beeps
Run/Point
Mode
- Dog running/moving: emits
double beep every 7 seconds
- Dog stationary/pointing: emits
double beep every 2 seconds
Press
2nd Time
1 Beep
Point-Only
Mode
- Dog running/moving: silent
- Dog stationary/pointing: emits
double beep every 2 seconds
Press
3rd Time
3 Beeps
No Beeper
Mode
No sound
