20
Battery Charging Procedure
Note:
The unit has a partial charge when it leaves the
Dogtra facility. Upon receipt of the collar, be sure to give
it a full 2-hour initial charge before the first use.
1. Attach the charging cables to both the transmitter and
receiver(s).
2. Plug the charger into a 120 volt wall outlet or, if using
the auto charger, plug into a cigarette lighter only for
lithium polymer batteries (use a 230 volt European
charger for Europe). All indicator lights should glow
red when properly plugged in and the unit will
automatically shut off during the charging process.
You will need to turn the unit on again before use once
the unit is fully charged and unplugged from
the battery cable.
3. The lithium polymer battery is fully charged within
2 hours. The lights will stay red during the charging
process. The red light will turn green once the unit is
fully charged.
4. After charging, cover the battery charging receptacles
with the rubber plugs on the transmitter and receiver.
