DOGA SCOUT II, Instruction Manual

Page: 17 / 40

Instructions manual / Electric screwdrivers
17
7. Interface
7.1 25P I/O interface details
The configuration of 25P I/O port for remote control is as below.
PIN no. Configuration IN / OUT
1 External Motor Run signal
2 External Torque Up signal
3 Cycle Start
4 Cycle Stop
5 Cycle Reset
6 Driver Lock
7 Spare 1
8 PS1 (Program selecting) PS1(P35 Enable)
9 PS2 (Program selecting) PS2(P35 Enable)
10 PS3 (Program selecting) PS3(P35 Enable)
11 PS4 (Program selecting) spare
12 PS5 (Program selecting) spare
13 PS6 (Program selecting) spare
14 PS7 (Program selecting) spare
15 PS8 (Program selecting) spare
16 Cycle complete OK
17 Cycle complete NG
18 Tightening OK
19 Tightening NG
20 Mid-count complete signal
21 Driver Lock
22 Spare 2
23 No use
24 Input COM
25 Output COM