Instructions manual
/ GX Screwdrivers
11
■
Angle setting for first RUN
①
Keep the first Run button pressed over 2 sec. for angle setting. Then press one by one for the desired
rotating angle
②
Select the R position of F/R switch for increasing set angle or F position for decreasing set angle
③
Keep the first Run button pressed over 2 sec. for Lock & operating mode.
■
Time setting for stop HOLD
①
Keep the
stop time
button pressed over 2 sec. Then click the stop time button one by one for desired
stop holding time
②
Select the R position of F/R switch for increasing set time or F position for decreasing set time
③
Keep the
stop time
button pressed over 2 sec. for Lock & operating mode.
