6
t-4 transmItter
Adjustments
There are 2 adjustments on the transmitter. You will need a small flathead, regular
screwdriver or a transmitter tweaking tool to make any adjustments.
A.
adjust the field Width or range Control (left side).
The signal field width
determines how close to the wire your pet can go. The normal setting will be about 6 feet.
If you need to adjust the width of the signal field, use an adjusting tool or small screwdriver.
Turn the range adjuster to the right to increase the signal field and to the left to decrease
the signal field. Be sure to remove the receiver from your pet before adjusting the signal.
Check the receiver at the line to assure that the desired width is obtained.
B.
adjust the Correction level (lower right face).
There are 32 levels of stimulus
within the range. This is preset by your dealer for your pet based on several factors, but can
be raised if a pet is challenging the system.
It is recommended that you call your local dealer before adjusting the field or
correction level.
Field Width or
Range Control
32 Levels of Correction
Tweaking Tool
