Dodge Stealth 1994, Service Manual

Page: 406 / 434

CHASSIS
ELECTRICAL Radio and
INSPECTION OF MOTOR ANTENNA CONTROL UNIT
<VEHICLE WITH MOTOR ANTENNA>
Connect the harness connector to the motor antenna.
(Body harness)
(2) Disconnect the antenna motor connector.
(3) With the ignition switch in the ACC or ON position, operate
the radio switch and check the voltage between the
terminals during the period when the antenna is going up or
going down.
Antenna operating Terminals to check
direction
Voltage
Down
l - 3
10 13
3 - 4 13
SERVICE POINT OF INSTALLATION
6. INSTALLATION OF REAR SEAT CUSHION
Securely fit the attachment wire of the seat cushion
under the seatback.
(2) Pass the inner seat belt buckles through the cushion.
(3) Securely fit the lock plates of the seat cushion into the
holes in the floor.
REPLACEMENT OF ANTENNA POLE <VEHICLE
WITH MOTOR ANTENNA>
(1) Remove the ring nut.
(2) Set the radio switch to ON. After the antenna pole has
extended, remove the antenna pole and rack cable as an
assembly.