Home
/
Dodge
/
Sprinter 3500
/
Owner'S Manual

Dodge Sprinter 3500, Owner'S Manual, Page: 397 / 518

Share

Page: 397 / 518

Dodge Sprinter 3500 Owner'S Manual Download Page 397

2–Wheel- Drive Vehicles

Provided that the transmission is operable, tow with the
transmission in Neutral and the ignition key in the OFF
position along with the front wheels raised and the rear
wheels on the ground. Speed must not exceed 30 mph (50
km/h) and distance must not exceed 15 miles (25 km).

CAUTION!

Towing faster than 30 mph (50 km/h) or for more than
15 miles (25 km) can cause severe damage to the
transmission.

If the vehicle is to be towed faster than 30 mph (50 km/h)
or more than 15 miles (25 km) the vehicle must be towed
with the rear wheels raised and the front wheels on the
ground. It may also be towed on a flatbed or with the
front wheels raised and the rear wheels on a dolly.

WHAT TO DO IN EMERGENCIES

397

6

«
...
395
396
397
398
399
...
»

Summary of Contents for Sprinter 3500







































































































































































































































































































































































































































































































































Reviews:

No comments