Dodge Sprinter 3500 Owner'S Manual Download Page 29 | Manualshive

Page: 29 / 518

Dodge Sprinter 3500 Owner'S Manual Download Page 29

•

For vehicles not equipped with the EVIC, performing
the following procedure:

1. Enter your vehicle and close all doors.

2. Fasten your seat belt (fastening the seat belt will cancel
any chimes that may be confusing during this program-
ming procedure).

3. Insert the key into the ignition.

4. Within 15 seconds, cycle the key from the LOCK
position to the ON/RUN position a minimum of four
times ending in the LOCK position (do not start the
engine)

.

5. Within 30 seconds, press the driver’s door lock switch
in the UNLOCK direction.

6. A single chime will sound to indicate the feature has
been changed.

7. Repeat the above steps to alternate the availability of
this feature.

8. If a chime is not heard, program mode was canceled
before the feature could be changed. If necessary repeat
the above procedure.

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

29

2

«
...
27
28
29
30
31
...
»

Summary of Contents for Sprinter 3500







































































































































































































































































































































































































































































































































Reviews:

No comments