manualshive.com logo in svg

Dodge Sprinter 3500, Owner'S Manual

The Dodge Sprinter 3500 Owner's Manual is a comprehensive guide that enables effortless understanding and maintenance of this versatile vehicle. Packed with detailed instructions and helpful diagrams, this user-friendly manual is available for free download at manualshive.com in just a few clicks. Empower yourself with the knowledge to optimize your Sprinter's performance.

Share
Download
background image

“N” Neutral
Shift to Neutral when the vehicle is standing for pro-
longed periods with the engine running. The engine may
be started in this range. Set the parking brake if you must
leave the vehicle.

“D” Drive
Drive range provides underdrive 1st, 2nd and 3rd gears,
direct 4th gear and overdrive 5th and 6th gears. The shift
into overdrive 5th and 6th gear occurs only after the
transmission has completed the shift into 4th gear. No
other movement of the shift mechanism is required to
complete the 4–5 or 5–6 gear shifts.

The 4th and 5th gear upshifts occurs automatically unless
the Tow/Haul mode is enabled.

Upshifts into both overdrive gears, 5th and 6th, will be
delayed when the transmission fluid temperature is
below 40° F (4.5° C) or above 240° F (115.5° C).

NOTE:

Use caution when operating a heavily loaded

vehicle in 2nd or 1st gear in high ambients as torque
converter slip can impose significant additional heat load
on the cooling system.

WARNING!

Never use Park position on an automatic transmis-
sion as a substitute for the parking brake. Always
apply parking brake fully when parked to guard
against vehicle movement and possible injury or
damage.

STARTING AND OPERATING

287

5

Summary of Contents for Sprinter 3500







































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Sprinter 3500

Vauxhall Ampera Owner'S Manual preview
Ampera
Brand: Vauxhall Pages: 199
Mazda 2008 MX-5 Miata Manual preview
2008 MX-5 Miata
Brand: Mazda Pages: 400
Dodge Charger SRT 392 2017 Operating Information Manual preview
Charger SRT 392 2017
Brand: Dodge Pages: 576
Lexus LS 500h 2022 Owner'S Manual, Quick Manual preview
LS 500h 2022
Brand: Lexus Pages: 108
Prorack K349 Fitting Instructions Manual preview
K349
Brand: Prorack Pages: 13
Edelbrock PRO-FLO XT 3527 User Manual preview
PRO-FLO XT 3527
Brand: Edelbrock Pages: 39
Edelbrock 3824 Installation Instructions preview
3824
Brand: Edelbrock Pages: 2
TrailPRO TPRGBW4 Quick Start Manual preview
TPRGBW4
Brand: TrailPRO Pages: 3
FACTORY UTV Dual Clamp Spare Tire Mount Installation Manual preview
Dual Clamp Spare Tire Mount
Brand: FACTORY UTV Pages: 2
Ford Mondeo 2007 Owner'S Handbook Manual preview
Mondeo 2007
Brand: Ford Pages: 292
OEM Audio Reference 450Q Manual preview
Reference 450Q
Brand: OEM Audio Pages: 21
Jeep Compass 2013 User Manual preview
Compass 2013
Brand: Jeep Pages: 116
Hotchkis 4010 Manual preview
4010
Brand: Hotchkis Pages: 16
Metra Electronics XIAH-FD4 Installation Instructions preview
XIAH-FD4
Brand: Metra Electronics Pages: 2
Akyga AK-CH-07 User Manual preview
AK-CH-07
Brand: Akyga Pages: 4
Siemens OpenAir GND Series Technical Instructions preview
OpenAir GND Series
Brand: Siemens Pages: 7
Siemens VersiCharge Ultra 175 Maintenance Manual preview
VersiCharge Ultra 175
Brand: Siemens Pages: 12
Siemens Desk Top Charger Manual preview
Desk Top Charger
Brand: Siemens Pages: 4

Brands by name

Popular brands

Load more brands