IN CASE OF EMERGENCY
87
R
EINSTALLING
T
HE
J
ACK
A
ND
T
OOLS
1. Tighten the jack all the way down by
turning the jack turn-screw counter
-
clockwise until the jack is snug.
2. Position the jack and tool bag. Make sure
the lug wrench is under the jack near the
jack turn-screw.
Jack And Tool Bag
3. Secure the tool bag straps to the jack.
Jack And Tools Tied
4. Place the jack and tools in the storage
position holding the jack by the jack
turn-screw, slip the jack and tools under the
seat so that the bottom slot engages into
the fastener on the floor.
NOTE:
Ensure that the jack slides into the front hold
down location.
5. Turn the wing bolt clockwise to secure to the
floor pan. Reinstall the plastic cover.
Jack Hold Down Wing Bolt
WARNING!
After using the jack and tools, always reinstall
them in the original carrier and location.
While driving you may experience abrupt
stopping, rapid acceleration or sharp turns. A
loose jack, tools, bracket or other objects in
the vehicle may move around with force,
resulting in serious injury.
7
21_DT_TRX_SU_EN_USC_t.book Page 87