Dodge RAM 2500 2022 Owner'S Manual Download Page 254

Page: 254 / 494

250

MULTIMEDIA

Audio Settings

This setting will open the submenu, containing the audio settings

page 265.

App Drawer Favoriting Pop-ups

This setting will allow you to favorite app drawer pop-ups with “On” and “Off” options.

App Drawer Unfavoritings Pop-ups

This setting will allow you to unfavorite app drawer pop-ups with “On” and

“Off” options.

New Text Message Pop-ups

This setting will allow you to have pop-up notifications for new text messages. Setting

options are “On” and “Off”.

Missed Calls Message

This setting will allow you to have pop-up notifications for missed calls. Setting options

are “On” and “Off”.

Navigation Pop-ups

This setting will allow you to have pop-up notifications for Navigation. Setting options

are “On” and “Off”.

Reset App Drawer to Default Order

This setting will reset the app drawer to its factory default layout.

Restore Settings to Default

This setting will return all the previously changed settings to their factory default.

Trip B

This setting will turn the Trip B feature in the cluster on or off.

Audio Info On Cluster

This setting will turn the audio info on the cluster on or off.

Digital Speed On All Cluster Screens

This setting will show the digital speedometer on all cluster screens.

Consumption Bar On Cluster Screen

This setting will show the digital fuel consumption bar on all cluster screens.

Custom Areas On Cluster

This setting will allow you to customize the information displayed on the cluster.

Audio Repetition

This setting will turn the system audio repetition on or off.

More Profile Options

This setting will give access to more profile options.

Setting Name

Description

22_DJD2_OM_EN_USC_t.book Page 250

Summary of Contents for RAM 2500 2022















































































































































































































































































































































































































































































































Search results

Summary of Contents for RAM 2500 2022

Reviews:

Related manuals for RAM 2500 2022

Brands by name

Popular brands

Dodge RAM 2500 2022, Owner'S Manual

Search results

Summary of Contents for RAM 2500 2022

Reviews:

Related manuals for RAM 2500 2022

Brands by name

Popular brands