manualshive.com logo in svg

Dodge DURANGO 2019, User Manual

The Dodge Durango 2019 user manual is an essential tool for any Durango owner. From detailed instructions to valuable insights, this comprehensive manual covers all aspects of your vehicle. Download it for free from our website manualshive.com, ensuring you have the necessary guidance to maximize your Durango experience.

Share
Download
background image

It is recommended to replace the two front tires
or two rear tires as a pair. Replacing just one tire
can seriously affect your vehicle’s handling. If
you ever replace a wheel, make sure that the
wheel’s specifications match those of the origi-
nal wheels.

It is recommended you contact an authorized
tire dealer or original equipment dealer with any
questions you may have on tire specifications or
capability. Failure to use equivalent replace-
ment tires may adversely affect the safety, han-
dling, and ride of your vehicle.

WARNING!

• Do not use a tire, wheel size, load rating, or

speed rating other than that specified for
your vehicle. Some combinations of unap-
proved tires and wheels may change sus-
pension dimensions and performance
characteristics, resulting in changes to
steering, handling, and braking of your
vehicle. This can cause unpredictable han-
dling and stress to steering and suspension
components. You could lose control and

WARNING!

have a collision resulting in serious injury
or death. Use only the tire and wheel sizes
with load ratings approved for your vehicle.

• Never use a tire with a smaller load index

or capacity, other than what was originally
equipped on your vehicle. Using a tire with
a smaller load index could result in tire
overloading and failure. You could lose
control and have a collision.

• Failure to equip your vehicle with tires

having adequate speed capability can re-
sult in sudden tire failure and loss of ve-
hicle control.

CAUTION!

Replacing original tires with tires of a differ-
ent size may result in false speedometer and
odometer readings.

Tire Types

All Season Tires — If Equipped

All Season tires provide traction for all seasons
(Spring, Summer, Fall, and Winter). Traction
levels may vary between different all season
tires. All season tires can be identified by the
M+S, M&S, M/S or MS designation on the tire
sidewall. Use all season tires only in sets of four;
failure to do so may adversely affect the safety
and handling of your vehicle.

Summer Or Three Season Tires — If
Equipped

Summer tires provide traction in both wet and
dry conditions, and are not intended to be
driven in snow or on ice. If your vehicle is
equipped with Summer tires, be aware these
tires are not designed for Winter or cold driving
conditions. Install Winter tires on your vehicle
when ambient temperatures are less than 40°F
(5°C) or if roads are covered with ice or snow.
For more information, contact an authorized
dealer.

Summer tires do not contain the all season
designation or mountain/snowflake symbol on
the tire sidewall. Use Summer tires only in sets

SERVICING

AND

MAINTENANCE

218

Summary of Contents for DURANGO 2019





























































































































































































































































































Reviews:

No comments

Related manuals for DURANGO 2019

A-Tach Mounts ST-1 Instructions preview
ST-1
Brand: A-Tach Mounts Pages: 2
A-Tach Mounts 50291 Quick Start Manual preview
50291
Brand: A-Tach Mounts Pages: 2
A-Tach Mounts 50206 Instructions preview
50206
Brand: A-Tach Mounts Pages: 2
Warrior Winches C10000NH Assembly & Operating Instructions preview
C10000NH
Brand: Warrior Winches Pages: 17
Mobile Create MCM3 Instruction Manual preview
MCM3
Brand: Mobile Create Pages: 15
Metra Electronics 95-6556 Installation Instructions preview
95-6556
Brand: Metra Electronics Pages: 4
Rostra REARSIGHT OnStar 250-8822 Installation Instructions preview
REARSIGHT OnStar 250-8822
Brand: Rostra Pages: 2
FormFit HD 23A 07 Installation Instructions preview
HD 23A 07
Brand: FormFit Pages: 4
REVCAMUK MON16AHD Instructions preview
MON16AHD
Brand: REVCAMUK Pages: 4
Dacia 2014 Sandero Driver'S Handbook Manual preview
2014 Sandero
Brand: Dacia Pages: 238
TATA Motors TIGOR EV 2021 Owner'S Manual preview
TIGOR EV 2021
Brand: TATA Motors Pages: 236
ideus VV950 User Manual preview
VV950
Brand: ideus Pages: 159
Reese Explore 63153 Instruction Manual preview
63153
Brand: Reese Explore Pages: 9
JCROffroad JEEP GL ADIATOR JT TOPPER ROOF RACK Install Instructions Manual preview
JEEP GL ADIATOR JT TOPPER ROOF RACK
Brand: JCROffroad Pages: 7
Vecow IVH-9000-2R440Q User Manual preview
IVH-9000-2R440Q
Brand: Vecow Pages: 110
v.link NAL-PC-HSD Manual preview
NAL-PC-HSD
Brand: v.link Pages: 21
Edelbrock 2917 Nstallation Instructions preview
2917 Nstallation
Brand: Edelbrock Pages: 1
Mazda 0000-8L-G03A Installation Instructions preview
0000-8L-G03A
Brand: Mazda Pages: 3

Brands by name

Popular brands

Load more brands