Dodge DURANGO 2019, User Manual

Page: 80 / 284

— Tow Mode SRT Indicator Light
This light will turn on when Tow Mode is active.
— Track Mode SRT Indicator Light
This light will turn on when Track Mode is
active.
— Turn Signal Indicator Lights
When the left or right turn signal is activated,
the turn signal indicator will flash indepen-
dently and the corresponding exterior turn sig-
nal lamps will flash. Turn signals can be acti-
vated when the multifunction lever is moved
down (left) or up (right).
NOTE:
• A continuous chime will sound if the vehicle is
driven more than 1 mile (1.6 km) with either
turn signal on.
• Check for an inoperative outside light bulb if
either indicator flashes at a rapid rate.
White Indicator Lights
— Adaptive Cruise Control (ACC)
Ready Light — If Equipped
This light will turn on when Adaptive Cruise Control
(ACC) has been turned on, but is not set. Refer to
“Adaptive Cruise Control (ACC)” in “Starting And
Operating” for further information.
— Custom Mode SRT Indicator Light
This light will turn on when Custom Mode SRT
is active.
— Cruise Control Ready Indicator
This indicator light will illuminate when the
cruise control is ready, but not set. Refer to
“Speed Control” in “Starting And Operating”
for further information.
— SRT Speed Warning Indicator Light
— If Equipped
When Set Speed Warning is turned on, the
speed warning telltale will illuminate in the
instrument cluster with a number matching the
set speed. When the set speed is exceeded, the
indication will light up yellow and flash along
with a continuous chime. Speed Warning can
be turned on and off in the instrument cluster
display.
Refer to “Instrument Cluster Display” in “Get-
ting To Know Your Instrument Panel” in the
Owner’s Manual for further information.
The number “55” is only an example of a speed
that can be set.
— LaneSense Indicator Light — If
Equipped
When the LaneSense system is ON, but not
armed, the LaneSense indicator light illumi-
nates solid white. This occurs when only left,
right, or neither lane line has been detected. If a
single lane line is detected, the system is ready
to provide only visual warnings if an uninten-
tional lane departure occurs on the detected
lane line.
Refer to “LaneSense — If Equipped" in “Start-
ing And Operating” for further information.
GETTING
TO
KNOW
YOUR
INSTRUMENT
P
ANEL
78