7. Wait for the beep, and then dictate any message up to 140 characters. If you exceed
140 characters, you will hear the following prompt: “Message was too long; your
message will be truncated.”
8. Uconnect will then repeat the message back to you.
9. Uconnect will prompt you: “To add to your message, say “Continue”; To delete the
current message and start over, say “Start Over”; to send the current message, say
“Send”; to hear the message again, say “Repeat.”
10. If you are happy with your message and would like to send it, wait for the beep and
say “Send.”
11. Uconnect will then say “Sending your message.”
Sample Commands For Voice Text Reply And Voice Texting
Example Command
Action
“Text John Smith”
Send a message to specific contact in ad-
dress book
“Text 123 456 7890”
Send 123 456 7890 a message from your
phonebook
“Show messages”
See recent text messages listed by number
on Uconnect screen
“Listen to/view (message number four, for
example)”
Hear messages or read it on Uconnect
screen
“Reply”
Send a voice text reply to a current message
“Forward text/message to “John Smith”
Forward current text to specific contact in
address book
“Forward text/message to “123 456 7890”
Forward current text to specific phone num-
ber
E L E C T R O N I C S
127
Summary of Contents for DURANGO 2017
Page 281: ...NOTES 279...
Page 282: ...NOTES 280...