Installing Child Restraints Using The Top Tether Anchorage
WARNING!
Do not attach a tether strap for a rear-facing car seat to any location in front of the car
seat, including the seat frame or a tether anchorage. Only attach the tether strap of a
rear-facing car seat to the tether anchorage that is approved for that seating position,
located behind the top of the vehicle seat. See the section “Lower Anchors and Tethers
for CHildren (LATCH) Restraint System” for the location of approved tether anchorages
in your vehicle.
1. Look behind the seating position where you plan to install the child restraint to find the
tether anchorage. You may need to move the seat forward to provide better access to
the tether anchorage. If there is no top tether anchorage for that seating position, move
the child restraint to another position in the vehicle if one is available.
2. Rotate or lift the cover to access the anchor directly behind the seat where you are
placing the child restraint.
3. Route the tether strap to provide the most direct path for the strap between the anchor
and the child seat. If your vehicle is equipped with adjustable rear head restraints,
raise the head restraint, and where possible, route the tether strap under the head
restraint and between the two posts. If not possible, lower the head restraint and pass
the tether strap around the outboard side of the head restraint.
4. Attach the tether strap hook of the child
restraint to the top tether anchorage as
shown in the diagram.
5. Remove slack in the tether strap accord-
ing to the child restraint manufacturer’s
instructions.
Tether Strap Attachment
1 — Cover
3 — Attaching Strap
A — Tether Strap Hook
B — Tether Anchor
G E T T I N G S T A R T E D
52
Summary of Contents for charger 2017
Page 271: ...NOTES 269 ...
Page 272: ...NOTES 270 ...
Page 273: ...NOTES 271 ...
Page 274: ...NOTES 272 ...