3. Before raising the vehicle, use the lug wrench to loosen, but not remove, the lug nuts
on the wheel with the flat tire. Turn the lug nuts counterclockwise one turn while the
wheel is still on the ground.
4. Place the jack underneath the lift area that is closest to the flat tire. Turn the jack screw
clockwise to firmly engage the jack saddle with the lift area of the sill flange.
NOTE:
If the vehicle is too low for jack placement, slide the jack on its side and rotate it up into
position.
5. Raise the vehicle just enough to remove
the flat tire and install the spare tire.
WARNING!
Raising the vehicle higher than necessary can make the vehicle less stable. It could slip
off the jack and hurt someone near it. Raise the vehicle only enough to remove the tire.
6. Remove the lug nuts and tire.
Rear Jacking Location
Front Jacking Location
W H A T T O D O I N E M E R G E N C I E S
189
Summary of Contents for charger 2017
Page 271: ...NOTES 269 ...
Page 272: ...NOTES 270 ...
Page 273: ...NOTES 271 ...
Page 274: ...NOTES 272 ...