Dodge CALIBER 2011, Owner'S Manual

Page: 295 / 560

out of REVERSE. To make your selection, press the Tilt
Mirrors in Reverse soft-key, select On or Off followed by
pressing the arrow back soft-key.
•
Blind Spot Alert
Press the Blind Spot Alert soft-key to change this display.
When this feature is selected the Blind Spot Alert feature
can be set to Off, Lights or Lights and Chime. The Blind
Spot Alert feature can be activated in “Lights” mode,
when this mode is selected the Blind Spot Monitor (BSM)
system is activated and will only show a visual alert in
the outside mirrors. When “Lights & Chime” mode is
activated the Blind Spot Monitor (BSM) will show a
visual alert in the outside mirrors as well as an audible
alert when the turn signal is on. When “Off” is selected
the Blind Spot Monitor (BSM) system is deactivated. To
change the Blind Spot Alert status press the Off, Lights or
Lights & Chime soft-key followed by pressing the arrow
back soft-key.
NOTE: If your vehicle has experienced any damage in
the area where the sensor is located, even if the fascia is
not damaged, the sensor may have become misaligned.
Take your vehicle to an authorized dealer to verify sensor
alignment. Having a sensor that is misaligned will result
in the BSM not operating to specification.
•
Rain Sensing
Press the Rain Sensing soft-key to change this display.
When this feature is selected, the system will automati-
cally activate the windshield wipers if it senses moisture
on the windshield. To make your selection, press the Rain
Sensing soft-key, select On or Off followed by pressing
the arrow back soft-key.
•
Hill Start Assist
Press the Hill Start Assist soft-key to change this display.
When this feature is selected, the Hill Start Assist (HSA)
system is active. Refer to “Electronic Brake Control
System” in “Starting And Operating” for system function
4
UNDERSTANDING YOUR INSTRUMENT PANEL 293