Dodge CALIBER 2011, Owner'S Manual

Page: 132 / 560

Uconnect™ Voice Command Button
The Uconnect™ Voice Command Button
is only used for “barge in” and when you are
already in a call and you want to send Tones or
make another call.
The button is also used to access the Voice
Commands for the Uconnect™ Voice Command features
if your vehicle is equipped. Please see the Uconnect™
Voice Command section for direction on how to use the
button.
The Uconnect™ Phone is fully integrated with the vehi-
cle’s audio system. The volume of the Uconnect™ Phone
can be adjusted either from the radio volume control
knob or from the steering wheel radio control (right
switch), if so equipped.
Operation
Voice commands can be used to operate the Uconnect™
Phone and to navigate through the Uconnect™ Phone
menu structure. Voice commands are required after most
Uconnect™ Phone prompts. There are two general meth-
ods for how Voice Command works:
1. Say compound commands like “Call John Smith mo-
bile”.
2. Say the individual commands and allow the system to
guide you to complete the task.
You will be prompted for a specific command and then
guided through the available options.
•
Prior to giving a voice command, one must wait for
the beep, which follows the “Listen” prompt or an-
other prompt.
•
For certain operations, compound commands can be
used. For example, instead of saying “Call” and then
130 UNDERSTANDING THE FEATURES OF YOUR VEHICLE