Dodge CALIBER 2011, Owner'S Manual

Page: 225 / 560

displayed if the system was in the ACC OFF position. To
switch back to Adaptive Cruise Control mode, press the
MODE button a second time.
WARNING!
In the normal Cruise Control mode, the system will
not react to vehicles ahead. In addition, the proximity
warning does not activate and no alarm will sound
even if you are too close to the vehicle ahead since
the presence of the vehicle ahead nor the vehicle-to-
vehicle distance is detected. Be sure to maintain a
safe distance between your vehicle and the vehicle
ahead. Always be aware which mode is selected.
To Set A Desired Speed
When the vehicle reaches the speed desired, press the
SET
- button and release. The EVIC will display the set
speed.
NOTE: You must observe the display when setting or
changing speed, not the speedometer.
To Vary The Speed Setting
There are two ways to change the set speed:
•
Use the accelerator pedal to adjust the vehicle to the
desired speed and press the SET
- button.
•
Tap the RES + or SET - button to increase or decrease
the set speed in 1 mph (1 km/h) increments respec-
tively. Hold the RES
+ or SET - button for 5 mph
(10 km/h) increments.
To Cancel
The system will disable normal Cruise Control without
erasing the memory if:
•
You softly tap or depress the brake pedal.
•
You press the CANCEL button.
3
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 223