Dodge 2014 JOURNEY Owner'S Manual Download Page 604

Page: 604 / 652

3. Carefully insert a trim stick (plastic flat-blade tool)

between the tail lamp housing and the liftgate. Use the
trim stick and hand pressure together to disengage the
tail lamp housing from the liftgate.

4. Rotate the applicable bulb’s electrical connector ¼ turn

counterclockwise and remove it from the housing.

5. Remove the bulb from the connector socket and install

the replacement bulb.

6. Install the bulb and connector assembly into the

housing and rotate the connector ¼ turn clockwise to
lock it in place.

7. Reinstall the tail lamp housing and fasteners.

License Plate Lamp

1. Push the small locking tab sticking out of the end of

the lens toward the side of the vehicle and hold it in
that position.

Tail Gate Lamp

602

MAINTAINING YOUR VEHICLE

Summary of Contents for 2014 JOURNEY













































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2014 JOURNEY

Reviews:

Related manuals for 2014 JOURNEY

Brands by name

Popular brands

Dodge 2014 JOURNEY, Owner'S Manual

Search results

Summary of Contents for 2014 JOURNEY

Reviews:

Related manuals for 2014 JOURNEY

Brands by name

Popular brands