Dodge 2014 JOURNEY Owner'S Manual Download Page 279

Page: 279 / 652

Power Inverter Operation

The power inverter is turned on and off using the
Uconnect® System.

Vehicles Equipped With Uconnect® 4.3

To turn the power inverter on or off perform the following:

1. Press the “More” hard-key (located next to the

Uconnect® display).

2. Press the “Outlet” soft-key (located on the Uconnect®

display) to turn the power inverter On or Off.

Vehicles Equipped With Uconnect® 8.4 and 8.4 Nav

To enable or disable the power inverter perform the
following:

1. Press the “Controls” soft-key.

2. Press the “Outlet” soft-key to turn the power inverter

On or Off.

CUPHOLDERS

There are two cupholders, located in the center floor
console, for the front passengers.

For passengers in the second row there are two cuphold-
ers, located in the center armrest between the two seats.

Floor Console Cupholders

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

277

Summary of Contents for 2014 JOURNEY













































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2014 JOURNEY

Reviews:

Related manuals for 2014 JOURNEY

Brands by name

Popular brands

Dodge 2014 JOURNEY, Owner'S Manual

Search results

Summary of Contents for 2014 JOURNEY

Reviews:

Related manuals for 2014 JOURNEY

Brands by name

Popular brands