Dodge 2014 JOURNEY, Owner'S Manual

Page: 139 / 652

Toggling Between Calls
If two calls are in progress (one active and one on hold),
press the
button until you hear a single beep, indicat-
ing that the active and hold status of the two calls have
switched. Only one call can be placed on hold at a time.
Also you can press the Swap soft-key on the Phone main
screen.
Join Calls
When two calls are in progress (one active and one on
hold), touch the “Join Calls” soft-key on the Phone main
screen to combine all calls into a Conference Call.
Call Termination
To end a call in progress, momentarily press the End soft-key
or the
button. Only the active call(s) will be terminated
and if there is a call on hold, it will become the new active
call. If the active call is terminated by the far end, a call on
hold may not become active automatically. This is cell
phone-dependent.
Redial
1. Press the “Redial” soft-key,
2. or press the button and after the “Listening”
prompt and the following beep, say “Redial.”
3. The Uconnect® Phone will call the last number that
was dialed from your mobile phone.
Call Continuation
Call continuation is the progression of a phone call on the
Uconnect® Phone after the vehicle ignition key has been
switched to OFF.
•
After the ignition key is switched to OFF, a call can
continue on the Uconnect® Phone either until the call
ends, or until the vehicle battery condition dictates
cessation of the call on the Uconnect® Phone and
transfer of the call to the mobile phone.
3
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 137