Dodge 2012 Challenger SRT8 Owner'S Manual Download Page 168

Page: 168 / 481

On some garage door openers/devices there may be a
light that blinks when the garage door opener/device is
in the LEARN/TRAIN mode.

NOTE:

You have 30 seconds in which to initiate the next

step after the LEARN button has been pressed.

6. Return to the vehicle and press the programmed
HomeLink

威

button twice (holding the button for two

seconds each time). The EVIC will display “CHANNEL #
TRANSMIT”. If the garage door opener/device activates,
programming is complete.

NOTE:

If the garage door opener/device does not

activate, press the button a third time (for two seconds) to
complete the training.

To program the remaining two HomeLink

威

buttons,

repeat each step for each remaining button. DO NOT
erase the channels.

Reprogramming A Single HomeLink

威

Button

To reprogram a channel that has been previously trained,
follow these steps:

1. Turn the ignition switch to the ON/RUN position.

2. Press and hold the desired HomeLink

威

button until

the EVIC displays “CHANNEL # TRAINING”

Do not

release the button.

Without releasing the button

proceed with “Program-

ming A Rolling Code” Step 2 and follow all remaining
steps.

Programming A Non-Rolling Code

For programming Garage Door Openers manufactured
before 1995.

1. Turn the ignition switch to the ON/RUN position.

166

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Summary of Contents for 2012 Challenger SRT8


































































































































































































































































































































































































































































































Search results

Summary of Contents for 2012 Challenger SRT8

Reviews:

Related manuals for 2012 Challenger SRT8

Brands by name

Popular brands

Dodge 2012 Challenger SRT8, Owner'S Manual

Search results

Summary of Contents for 2012 Challenger SRT8

Reviews:

Related manuals for 2012 Challenger SRT8

Brands by name

Popular brands