Dodge 2009 Challenger, Owner'S Manual

Page: 84 / 541

Cancel Command
At any prompt, after the beep, you can say
⬙
Cancel
⬙
and
you will be returned to the main menu. However, in a
few instances the system will take you back to the
previous menu.
Pair (Link) uconnect
威
phone to a Cellular Phone
To begin using your uconnect
威
phone, you must pair
your compatible Bluetooth
威
enabled cellular phone.
To complete the pairing process, you will need to refer-
ence your cellular phone Owner’s Manual. The
uconnect
威
website may also provide detailed instructions
for pairing.
The following are general phone to uconnect
威
phone
pairing instructions:
•
Press the PHONE button to begin.
•
After the
⬙
Ready
⬙
prompt and the following beep, say
⬙
Setup Phone Pairing.
⬙
•
When prompted, after the beep, say
⬙
Pair a Phone
⬙
and
follow the audible prompts.
•
You will be asked to say a four-digit Personal Identi-
fication Number (PIN), which you will later need to
enter into your cellular phone. You can enter any
four-digit PIN. You will not need to remember this PIN
after the initial pairing process.
•
For identification purposes, you will be prompted to
give the uconnect
威
phone a name for your cellular
phone. Each cellular phone that is paired should be
given a unique phone name.
•
You will then be asked to give your cellular phone a
priority level between one and seven, with one being
the highest priority. You can pair up to seven cellular
phones to your uconnect
威
phone. However, at any
given time, only one cellular phone can be in use,
connected to your uconnect
威
phone. The priority
allows the uconnect
威
phone to know which cellular
82 UNDERSTANDING THE FEATURES OF YOUR VEHICLE