Dodge 2007 Power Wagon Owner'S Manual Download Page 443

Page: 443 / 492

FLUIDS, LUBRICANTS AND GENUINE PARTS
Engine

Component

Fluids, Lubricants and Genuine Parts

Engine Coolant

Mopar

Antifreeze/Coolant 5 Year/100,000 Mile Formula HOAT (Hybrid Or-

ganic Additive Technology) P/N 5011764AB or equivalent.

Engine Oil (For trucks operating
under a gross combined weight
rating less than 14,000 lbs.)

Use SAE 5W-20, API Certified, meeting material standard MS-6395.

5.7L Engine Oil (For trucks operat-
ing under a gross combined
weight rating greater than 14,000
lbs.)

Use SAE 5W-30, API Certified, meeting material standard MS-6395.

Engine Oil Filter

Mopar

Engine Oil Filter, P/N 5281090 or equivalent.

Spark Plugs

Refer to the Vehicle Emission Control Information label in the engine com-
partment.

Fuel Selection (5.7L)

89 Octane Mid-Grade, (R+M)/2 Method Preferred (87 Octane Acceptable)

442

MAINTAINING YOUR VEHICLE

Summary of Contents for 2007 Power Wagon













































































































































































































































































































































































































































































































Search results

Summary of Contents for 2007 Power Wagon

Reviews:

Related manuals for 2007 Power Wagon

Brands by name

Popular brands

Dodge 2007 Power Wagon, Owner'S Manual

Search results

Summary of Contents for 2007 Power Wagon

Reviews:

Related manuals for 2007 Power Wagon

Brands by name

Popular brands