Dodge 2004 JR41 Stratus Sedan Owner'S Manual Download

Page: 215 / 273

The following maintenance recommendations will enable
you to obtain maximum benefit from the corrosion
resistance built into your vehicle.

What Causes Corrosion?
Corrosion is the result of deterioration or removal of
paint and protective coatings from your vehicle.

The most common causes are:

•

Road salt, dirt and moisture accumulation.

•

Stone and gravel impact.

•

Insects, tree sap and tar.

•

Salt in the air near seacoast localities.

•

Atmospheric fallout/industrial pollutants.

Washing

•

Wash your vehicle regularly. Always wash your ve-
hicle in the shade using a mild car wash soap, and
rinse the panels completely with clear water.

•

If insects, tar or other similar deposits have accumu-
lated on your vehicle, wash it as soon as possible.

•

Use Mopar auto polish to remove road film and stains
and to polish your vehicle. Take care never to scratch
the paint.

•

Avoid using abrasive compounds and power buffing
that may diminish the gloss or thin out the paint
finish.

CAUTION!

Do not use abrasive or strong cleaning materials
such as steel wool or scouring powder, which will
scratch metal and painted surfaces.

Special Care

•

If you drive on salted or dusty roads or if you drive
near the ocean, hose off the undercarriage at least once
a month.

•

It is important that the drain holes in the lower edges
of the doors, rocker panels and rear deck lid be kept
clear and open.

MAINTAINING YOUR VEHICLE

215

Summary of Contents for 2004 JR41 Stratus Sedan


















































































































































































































































































Search results

Summary of Contents for 2004 JR41 Stratus Sedan

Reviews:

Related manuals for 2004 JR41 Stratus Sedan

Brands by name

Popular brands

Dodge 2004 JR41 Stratus Sedan, Owner'S Manual

Search results

Summary of Contents for 2004 JR41 Stratus Sedan

Reviews:

Related manuals for 2004 JR41 Stratus Sedan

Brands by name

Popular brands