manualshive.com logo in svg

Dodge 2004 JR41 Stratus Sedan, Owner'S Manual

The Dodge 2004 JR41 Stratus Sedan Owner's Manual is an essential guide for Stratus Sedan owners. Discover important information about maintenance, operation, and troubleshooting, all conveniently available for free download at manualshive.com. Obtain the manual and enhance your ownership experience with this comprehensive resource.

Share
Download
background image

WARNING!

Your vehicle could move and injure you and others if
it is not completely in P (Park). Check by trying to
move the gearshift lever back and forth without
depressing the shift button after you have set it in P.
Make sure it is in Park before leaving the vehicle.

WARNING!

Never use the Park position as a substitute for the
parking brake. Always apply the parking brake fully
when parked to guard against vehicle movement and
possible injury or damage.

“R” Reverse
Shift into this range only after the vehicle has come to a
complete stop.

“N” Neutral
Engine may be started in this range.

“D” Overdrive
This range should be used for most city and highway
driving. It provides smoothest up shifts and down shifts
and best fuel economy.

When frequent transaxle shifting occurs while using the
Overdrive range, such as when operating the vehicle
under heavy loading conditions (in hilly terrain, travel-
ing into strong head winds, or while towing heavy
trailers), use the “3” range.

“3” Drive
This range eliminates shifts into Overdrive. The transaxle
will operate normally in first and second while in this
range.

A delayed shift from second to third will occur at speeds
of about 31 to 38 mph (50 to 60 km/h) and low levels of
accelerator pedal travel. An early down-shift from third
to second will occur at a speed of about 34 to 30 mph (54
to 48 km/h). This is done to provide second gear engine
braking at speeds less than 30 mph (48 km/h).

136

STARTING AND OPERATING

Summary of Contents for 2004 JR41 Stratus Sedan


















































































































































































































































































Reviews:

No comments

Related manuals for 2004 JR41 Stratus Sedan

Triumph MAYFLOWER 1951 Instruction Book preview
MAYFLOWER 1951
Brand: Triumph Pages: 86
Jacobsen Cushman Turf Truckster Parts & Maintenance Manual preview
Cushman Turf Truckster
Brand: Jacobsen Pages: 210
HUSKY LINERS X-ACT CONTOUR 53491 Care And Use Instructions preview
X-ACT CONTOUR 53491
Brand: HUSKY LINERS Pages: 2
Volvo 30728293 Installation Instructions Manual preview
30728293
Brand: Volvo Pages: 19
FormFit HD 10L07 Installation Instructions preview
HD 10L07
Brand: FormFit Pages: 2
Whispbar K934W Fitting Instructions Manual preview
K934W
Brand: Whispbar Pages: 15
femkes Hopper on Top User Manual preview
Hopper on Top
Brand: femkes Pages: 7
Omix-Ada 11704.05 Owner'S Manual preview
11704.05
Brand: Omix-Ada Pages: 6
Ranger design 1525-FTR Installation Manual preview
1525-FTR
Brand: Ranger design Pages: 24
r.LiNK RL2-MMI3G-GW Manual preview
RL2-MMI3G-GW
Brand: r.LiNK Pages: 21
Rydeen BSS2 Owner'S Manual preview
BSS2
Brand: Rydeen Pages: 14
Whispbar WB201 Manual preview
WB201
Brand: Whispbar Pages: 14
Scosche VQ2M Manual preview
VQ2M
Brand: Scosche Pages: 32
Navman N-series B2+ User Manual preview
N-series B2+
Brand: Navman Pages: 27
Edelbrock 4789 Installation Instructions preview
4789
Brand: Edelbrock Pages: 2
OCAM SS2-RANGER-12 Fitting Instruction preview
SS2-RANGER-12
Brand: OCAM Pages: 4
TEINHOF P-038 Fitting And Operation Manual preview
P-038
Brand: TEINHOF Pages: 2
Safe Fleet Prime Design AAL-8003 Manual preview
Prime Design AAL-8003
Brand: Safe Fleet Pages: 8

Brands by name

Popular brands

Load more brands